background image

17

MODEL #A2000 – 2,000LB (907KG) WINCH

WARRANTy

WarranTy

KAPPERS FABRICATING, INC. 
1 YEAR LIMITED LIFETIME WARRANTY

Warranty Qualifications

Kappers Fabricating Inc. (KFI) will register this warranty 
upon receipt of your Warranty Registration Card and 
a copy of your sales receipt from one of KFI’s resale 
locations as proof of purchase. Please submit your 
warranty registration and your proof of purchase 
within Fifteen (15) days of the date of purchase.

Repair/Replacement Warranty

KFI warrants to the original purchaser that mechanical 
components will be free of defects in material and 
workmanship for the usable lifetime of the product (90 
days for commercial use); and electrical components 
will be free of defects in material and workmanship 
for (1) year (90 days for commercial use); from the 
original date of purchase. Transportation charges 
on product submitted for repair or replacement 
under this warranty are the sole responsibility of 
the purchaser. This warranty only applies to the 
original purchaser and is not transferable.

Do Not Return The Unit To The Place 

Of Purchase

Contact KFI’s Technical Service and KFI will troubleshoot 
any issue via phone or e-mail. If the problem is not 
corrected by this method, KFI will, at its option, authorize 
evaluation, repair or replacement of the defective part 
or component at a KFI Service Center. KFI will provide 
you with a case number for warranty service. Please 
keep it for future reference. Repairs or replacements 
without prior authorization, or at an unauthorized 
repair facility, will not be covered by this warranty.

Warranty Exclusions

This warranty does not cover the 
following repairs and equipment:

Normal Wear

Winches need periodic parts and service to perform well. 
This warranty does not cover repair when normal use has 
exhausted the life of a part or the equipment as a whole.

Installation, Use and Maintenance

This warranty will not apply to parts and/or labor if this 
winch is deemed to have been misused, neglected, 
involved in an accident, abused, loaded beyond the 
winch’s limits, modified, installed improperly or wired 
incorrectly to any electrical component. Normal 
maintenance is not covered by this warranty.

Other Exclusions

 

– The winch cable or synthetic cable.

 

– Cosmetic defects such as paint, decals, etc.

 

– Accessory parts such as storage covers.

 

– Misuse, abuse, neglect, acts of God, terrorism 

and causes beyond the control of KFI.

 

– Problems caused by parts that are not 

original Kappers Fabricating Inc. parts.

 

– Cable Stacking and Water Submersion 

or Damage Caused by Water.

Warranty Procedure

1. 

Contact KFI Technical support to acquire 
a Return Authorization (RA) number.

2. 

KFI may request additional materials (such 
as original sales receipt, date of purchase, 
technical details, or photos of Product 
condition) prior to issuing an RA number.

3. 

At the discretion of KFI, Buyer shall mail, ship, 
or otherwise deliver to KFI the Warrantied 
Product, at the address noted below.

Limits of Implied Warranty and 

Consequential Damage

Kappers Fabricating Inc. disclaims any obligation to 
cover any loss of time, use of this product, freight, or 
any incidental or consequential claim by anyone from 
using this winch. THIS WARRANTY IS IN LIEU OF 
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 
INCLUDING WARRANTIES OF MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE
A unit provided as an exchange will be subject to the 
warranty of the original unit. The length of the warranty 
governing the exchanged unit will remain calculated 
by reference to the purchase date of the original unit.
This warranty gives you certain legal rights 
which may change from state to state. Your state 
may also have other rights you may be entitled 
to that are not listed within this warranty. 

Summary of Contents for A2000

























Reviews: