©2017 Copyright Kappers Fabricating, Inc. All rights reserved
Page 1
CF-Moto CForce 400S
Winch Mount
Winch Mount
PART # 101355
Hardware Kit: HK-326
Kit Components:
INSTALLATION INSTRUCTIONS:
Note: Make sure all of the hardware needed to complete this
mount are in the package. Depending on your winch you may
have extra hardware left over when finished installing. Read
through and understand the instructions before installing.
1. Remove the (4) bolts from the front plastic fascia.
Shown in Figure 2.
2. Set winch mount plate (1) and winch (A) upside down
in the opening behind the front frame tubes. Shown in
Figure 3.
3. Attach mount plate (1) loosely to the back of the
frame using the four carriage bolts (3) into the stock
hole location. Shown in Figure 4.
“Figure 1”
Item # Qty. Description
1
1
Winch Mount
2
1
Winch Fairlead Plate
3
4
3/8-16 X 1” Short Neck Carriage Bolt
4
4
3/8-16 Hex Flange Nylock Nut
5
2
5/16”-18 X 1-1/4” Hex Flange Bolt
6
2
5/16”-18 Hex Flange Nylock Nut
2
1
6
3
4
5
1
“Figure 4” Passenger Side.
“Figure 2”
“Figure 3” Front End
A
3
Motor Side
Clutch Side
