background image

5

Damage Requiring Service

–Unplug the set from

the wall outlet and refer servicing to qualified
service personnel under the following conditions:

–When the power cord or plug is damaged or frayed.

–If liquid has been spilled or objects have fallen into the set.

–If the set has been exposed to rain or water.

–If the set has been subjected to excessive shock by

being dropped, or the cabinet has been damaged.

–If the set does not operate normally when

following the operating instructions, adjust only
those controls that are specified in the operating
instructions. Improper adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to restore
the set to normal operation.

–When the set exhibits a distinct change in

performance, this indicates a need for service.

Servicing

–Do not attempt to service the set

yourself as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.

Replacement of parts

–When replacement of

parts is required, be sure the service technician has
used replacement parts specified by the
manufacturer that have the same characteristics as
the original parts. Unauthorized substitutions may
result in fire, electric shock, or other hazards.

Safety Check

–Upon completion of any service or

repairs to the set, ask the service technician to
perform routine safety checks (as specified by the
manufacturer) to determine that the set is in safe
operating condition.

SERVICE

FRAYED OR CUT

AC LINE

CRACKED PLUG

DVSS127W-GB/D  0.10.6 10:7 AM  ˘

`

5

Summary of Contents for RD127MS




































Reviews: