DEVIS (v.2) Operator’s Manual
Keywest Technology Early Warning Systems
Keywest Technology
14563 W. 96
th
Terrace
Lenexa, Kansas 66215
800.331.2019
www.keywesttechnology.com
19
KWT TM 2-1-DEVISOM
14 Mar 03
Change 02
The next step, once you’re satisfied with the presentation you’ve selected, is to click the “Set”
button itself. When you click the “Set” button, the presentation will be loaded for the slot you
are working on. Your indication that the setting is loaded properly is the file name that appears
after the “Play” button for that slot will now correspond to the presentation you selected in the
previous step (FIGURE 15).
All 12 slots “Set” buttons shown in figure 16 operate in the same manner. When you’ve set the
file, you’ll see the loaded slot file name (as seen in figure 15) change to the new file you’ve
selected. That is your indication that you are good to go to launch that file.
Note that we programmed our sample DEVIS with presentations repeating in some slots; we
used presentations with “emerg” in the name as normal’s; we used “normal” presentations as
emergency slots—remember, all presentations in your “C:\DEVISFOL\PRESENTATIONS” are
available for any slot and may be repeated as often as desired, or not used at all.
Figure 15
Figure 16