KEYTRONIX I-SAD 19"-S, Operating Instructions Manual

Page: 70 / 74

Configuration
70
Switch / Switch Commands:
SW-VT „VID“ –d deletes the „VID“ entry
SW -VT shows all entries
SW –VT x x x is for programming the VLAN Table
Syntax:
SW-VT „VID“ „PRIO” „OPT_ETH1“ „OPT_ETH2“ „OPT_SFP“ „OPT_ETHx“
Values:
VID 0-4095
PRIO 0..7
OPT=0 „unmod“ Pakets of this VLAN group will be transmitted from this
port unmodified
OPT= 1 „untag“ Pakets of this VLAN group will be transmitted from this
port untagged
OPT=2 „tagged“ Pakets of this VLAN group will be transmitted from this
port tagged
OPT=3 „-“ Pakets of this VLAN group will be ignored and not
transmitted from this port
SW-PORT shows the configuration of the Ethernetports an
SW-PORT « port » shows the configuration of the entered port
SW-PORT «PORT » « tag_mode » « ingress mode » « default vid »
« default_priority » set all parameters
Values :
PORT NMS, ETH1, ETH2, SFP, ETHx
tag_mode y,n
ingress_mode y,n
default vid 0..4095
default priority 0..7