Humidifier Assembly
Lower the tank into place until it is properly seated,
using the enclosure and the base to align the
tank.
Air outlet is installed on the water tank
Filling the Water Tank
Always unplug unit before filling and replacing tank.
Remove tank from the base.
Turn upside down and remove the filler cap on the bottom of the tank by
turning it counterclockwise.
Fill the tank with COOL tap water.
DO NOT USE HOT WATER. Be sure to keep the tank
free of debris.
NOTE:
Using distilled or deionized
water will prolong the life of the filter.
Replace the filler cap and turn clockwise until the LOCK.
NOTE:
Always make sure the filler cap is locked in place
before inverting water tank.
Setting the Controls
Turn Unit On.
Plug power cord into a
120V AC wall outlet only.
Turn knob in a clockwise
direction
to begin
operation of unit.
Turn knob to
illuminate water tank for
nighttime operation.
Turn Unit Off.
Turn unit off when desired room humidity is achieved.
Always turn unit off when water tank becomes empty.
Unit will automatically stop creating mist when water
level in base is very low and red light shows.
Do not let water sit in tank for more than 24 hours.
This can encourage bacterial growth.
Disconnect when not in use.
Direction of the mist.
The air outlet can rotate 360 degrees,
adjusted in accordance with the preferences toward.
How to Clean
IMPORTANT:
Clean your humidifier regularly (every 2 weeks or more as
needed) to help eliminate odors.
CAUTION:
Disconnect the power cord before cleaning the unit.
1. Turn OFF and unplug the humidifier.
2. Remove the water tank from the base.
3. Pour all water from the tank. DO NOT USE SOAP OR DETERGENTS AND
NEVER USE ABRASIVE CLEANERS.
4. Rinse the Water Tank thoroughly with clean water or with a mild bleach and
water solution.
5. Take brush stored in base and clean off mineral deposits and debris from
nebulizer and water sensor.
6. Wipe all surfaces of the base unit with a soft DRY or slightly dampened
cloth.
DO NOT IMMERSE THE BASE UNIT IN WATER, AN ELECTRIC SHOCK
MAY RESULT OR THE HUMIDIFIER MAY BE DAMAGED.
7. Prior to storage, make sure all components are completely dry.
Technical Specifications
Voltage
120V~60Hz
Power Consumption
36W
Product Holder
Join-One Electric (Shenzhen) Co.,Ltd.
Subject to technical modification
P6-14606
P5-14606