KEYSTOKER INSTALLATION INSTRUCTIONS
BAY WINDOW STOVES WITH THERMOSTAT
3
The following instructions are meant to serve as guidelines for proper cleaning and care
of
ROBAX
glass ceramic windows.
ALL cleaning procedures should be done at room temperature
CLEANING OF HOT
CLASS SHOULD BE AVOIDED.
Cleaning solutions applied to hot glass may dry
before cleaning agent is removed, which may result in creating a film or deposit that can
react with combustion by products. Dried on cleaning solution may react with surface
causing discoloration or a permanent film.
If white deposits are found to be on the surface of glass, these should be scraped off
using a sharp bladed scrapper and wiped away with a dry cloth prior to any wet
cleaning. Scrapping should be done at a low angle below 30 degrees.
Although glass is extremely hard and very scratch resistant, it is not scratch proof. The
use of abrasive cleaners (i.e., any cleaners containing grit) and scouring pads (i.e., steel
wool, plastic with embedded grit) should be strictly avoided.
Soft cloths should be used for all cleaning steps. The cloths should be free of any
abrasive agents from any previous use.
Dried on cleaning solutions may react with glass surface causing discoloration or a
permanent film.
While
ROBAX
glass is the best glass for use on anthracite burning coal stove, the
manufacturer of the glass offers no warranty.
To clean glass, first turn down the thermostat to allow the stove to cool. Assemble fire
door shield, using metal plate (approximately 16” x 14”) and wooden dowel with
threaded rod.
.
Also warranty parts DO NOT include labor costs or shipping cost of defective part
returned to factory.
