34
2. Move back within the USB dongle’s range.
3. Press any key to recovery from Sleep mode.
4. Check the connection icon
is displayed.
4.6 Charging the Batteries
Plug the small connector on the supplied USB charging cable into the USB
connector port on the bottom of your phone.
With your computer turned on, plug the other end of the cable into a USB
connector on the computer, the phone will begin recharging automatically.
The charging indicator appears on the display, you can make/receive calls
while charging.
When the charging indicator stays in full charge
remove the charging cable.
Note:
The charging time depends on the battery discharging condition, load and the
temperature, it takes approximately 5 hours to full charge the batteries.
Appendix A: Troubleshooting
This appendix provides common problems and solutions that may occur during the operation of
the phone, whenever you have problems with your phone, please check the followings first:
The phone’s power is turned on and the volume control is normal.
The USB dongle is properly connected to the PC.
Make sure that you have a phone signal (the phone signal strength
should have
at least 1 segment showing), if the indicator shows
, please try to move the phone
closer to the USB dongle, and check your PC is connected to Internet.
1. There is no sound when you pick up a call.
Summary of Contents for VP-24A
