Version 1.1 (2009/07/28)
●
© 2009 by MaxPoint Handelsges. mbH
- 11 -
2.3 Installation of the keyboard
Recommended requirement for the installation of keyboard is the successful installation of the USB receiver
under point 2.2.
•
If you haven’t done yet, remove the covering
of the battery case on the bottom of your keyboard.
Install the included batteries of type AAA 1.5 V
considering the right polarity in the battery case
(see picture).
•
Switch the I/O sliding switch to
ON
position!
Advice:
The USB receiver and the keyboard are already factory-set to the same radio channel. Normally you do
not have to re-synchronise (as described under point 2.4). The keyboard is immediately functional.
•
You can now check the functionality by pressing any
key of your keyboard. If you, for example, press the
Windows key, the Windows pop-up menu should
open up at the bottom left hand side of your screen.
If so, your wireless keyboard is working correctly
now. If not, please re-synchronise the USB receiver
and the keyboard like described under point 2.4.
Advise:
Should the functionality be influenced by other users applying their wireless keyboard close-by, make a
new-synchronisation as described under point 2.4.
Summary of Contents for ACK-540 ALU+RF Wireless Intuition-XS
Page 2: ......
