Getting Started Using KS8400A TAP Developer’s System
1
Keysight X8711A IoT Device Functional Test Solution User’s Guide
23
Run Test Plan
1
Once you are satisfied with the customized test plan, turn on your DUT and
place it in the shield box. Click the
Run
button to run the test plan.
2
Allow some time for the 34999A to initiate and connect with your DUT when
prompted to do so. |
3
The Log panel will display a
Passed
or
Failed
message when your device test
completes; an example is shown below.
4
For result analysis, you can add the Results Listeners plug-in mentioned in
to search recorded files.
NOTE
Using the 34999A module for the first time may take three minutes to load
calibration data. This will happen each time you switch to a new PC, use a new
34999A module or calibrate your instrument.
NOTE
Refer to
section to understand the purpose and
function of each test step for
Bluetooth
®
LE 4.2 signaling and WLAN b, g or n
measurement suites, respectively.
