Keysight U3042AE16, User'S And Service Manual

Page: 60 / 90

U3042AE16 Cal Kit Operational Check
Cal Kit Operational Check
The following procedure can be used to confirm that the test set and analyzer are operational.
The operation verification limits provided ensure that your test set and analyzer are operating
properly within the limits. Refer to “General Specifications” on page 7 .
Equipment Required
The test set requires that the user be familiar with the equipment and components listed in
Table 16 .
This section provides an equipment list and configuration of the analyzer and test set.
Table 16
Equipment List
Description Qty
N4691A 3.5 mm ECal Module 10 MHz to 26.5 GHz (Option 00F or M0F) or 
N4691B 3.5 mm ECal Module 300 kHz to 26.5 GHz (Option 00F or M0F) or

Mechanical cal kit 85052B or 85052D
1
N5232A 4-Port Network Analyzer (Option 245 and 551) or

N5222A, N5232A or N5242A Option 400 and 551
1
Set of interconnect cables (PNA and test set), see “N5232A RF Interface Cable
Connections (U3021-60075)” on page 20 or “N5222A and N5242A RF
Interface Cable Connections (U3021-60077)” on page 22 .
1
56 User's and Service Guide U3042-90012