Keysight U3020AS26, User'S And Service Manual

Page: 37 / 41

Keysight U3020A User’s and Service Guide 37
Regulatory Information
This section contains information that is required by various government regulatory agencies.
Instrument markings
Compliance with German noise requirements
This is to declare that this instrument is in conformance with the German Regulation on Noise
Declaration for Machines (Laermangabe nach der Maschinenlaermrerordnung-3. GSGV
Deutschland).
The instruction documentation symbol. The product is marked with this symbol when it is
necessary for the user to refer to the instructions in the documentation.
This symbol indicates separate collection for electrical and electronic equipment, mandated
under EU law as of August 13, 2005. All electric and electronic equipment are required to be
separated from normal waste for disposal (Reference WEEE Directive, 2002/96/EC).
This symbol indicates that the power line switch is in the STANDBY position.
This symbol is used to identify a terminal which is internally connected to the product frame or
chassis.
The CE mark is a registered trademark of the European Community. (If accompanied by a year, it is
when the design was proven.)
The CSA mark is a registered trademark of the CSA International. This instrument complies with
Canada: CSA 22.2 No. 61010-1-04.
This is a symbol of an Industrial Scientific and Medical Group 1 Class A product (CISPR 11, Clause
54)
This is a marking to indicate product compliance with the Canadian Interference-Causing
Equipment Standard (ICES-001).
IP 2 0
The instrument has been designed to meet the requirements of IP 2 0 for egress and operational
environment.
This is a required mark signifying compliance with an EMC requirement. The C-Tick mark is a
registered trademark of the Australian Spectrum Management Agency.
Indicates the time period during which no hazardous or toxic substance elements are expected to
leak or deteriorate during normal use. Forty years is the expected useful life of the product.
This symbol on all primary and secondary packaging indicates compliance to China standard GB
18455-2001.
ICES/NMB-001