Keysight PD1000A, Operating Manual

Page: 11 / 26

Keysight PD1000A Bias T Operating Guide 11
PD1000A Specifications
Static-safe Handling Procedures
Electrostatic discharge (ESD) can
damage or destroy electronic
components. Use a static-safe work
station to perform at work on electronic
assemblies. The figure shows a
static-safe work station using two types
of ESD protection:
– Conductive table-mat and
wrist-strap combination
– Conductive floor-mat and
heel-strap combination
Both types, when used together, provide a significant level of ESD protection. Of
the two, only the table-mat and wrist-strap combination provides adequate ESD
protection when used alone. To ensure user safety, the static-safe accessories
must provide at least 1 M
Ω
of isolation from ground.
PD1000A Specifications
Specifications describe warranted performance of the device.
Table 1 PD1000A Bias T Specifications
Parameter PD1000A (Typical)
Impedance 50 Ω
Maximum Voltage
±
42 V
Maximum Current 5 A
Resistance (bias input to RF port) 70 m Ω
Frequency Range 50 kHz to 3 GHz (typical)
Rise Time 100 pS (typical)
Environmental Temperature 23
°
C
±
5
°
C with less than 1
°
C deviation from
the calibration temperature
Capacitance (RF port 1 to port 2) 0.15 μ F
Inductance 185
μ
H
RF Connectors SMA female to ENA, SMA male to Test Fixture
DC Connectors 4 mm jack (banana jacks)