manualshive.com logo in svg

Keysight P9370A, Startup Manual, Page: 9 / 38

Share
Download
Keysight P9370A Startup Manual Download Page 9

Keysight Technologies Startup Guide                                                                                            1-9

Getting Started
STEP 3. Install the Software

Software Installation Overview

The software installation includes the following items:

— Keysight IO Libraries Suite (IOLS 2018 Update 1 or greater

1

), which includes 

the Keysight Connection Expert. Download the latest version at 

www.keysight.com/find/iosuite

. If you are unable to access the Web, you 

can purchase Option 2CD which includes an IO Library Suite CD. This 

software must be installed first.

— Network analyzer instrument software, which includes the soft front panel 

(SFP) software, device drivers (IVI-C and IVI-COM, and LabVIEW G), and 

documentation for the P937xA Vector Network Analyzers. Download the 

latest version at 

http://www.keysight.com/technicalsupport/main

. Enter 

the model for your instrument and click 

Find

. If you are unable to access the 

Web, you can purchase Option 2CD which includes a software CD. 

 

Software Installation Procedure

1.

Install the Keysight IO Libraries Suite (IOLS 2018 Update 1 or greater) by 

downloading it from 

www.keysight.com/find/iosuite

 (or the IO Libraries 

Suite CD, if you purchased Option 2CD). Follow the installer prompts to 

install the IO libraries.

2.

Install the network analyzer software by downloading it from 

http://www.keysight.com/technicalsupport/main

 (or the software CD, if 

you purchased Option 2CD). Enter the model for your instrument and click 

Find

. Follow the installer prompts.

3.

Complete the installation:

a.

After the InstallShield Wizard has completed, click 

Finish

.

b.

Shut down the remote controller PC, using 

Start

 > 

Shut down

.

c.

Power down the P937xA.

d.

Use the power button to power up the P937xA.

1. IO Libraries version 2018 update 1, version 18.1.23205.4 or greater. BenchVue and 

Connection Expert are optional downloads.

Ensure that Keysight IO Libraries Suite IOLS 2018 Update 1 or greater is loaded into 

your PC controller, 

before

 you connect and power up the P937xA.

IMPORTANT!

 Ensure your P937xA is powered down and 

not

 connected to 

your PC and ensure that your PC is connected to the internet.

Summary of Contents for P9370A







































Reviews:

No comments