Keysight N9913B User Manual Download Page 537

Page: 537 / 896

Keysight N9938-90006 User’s Guide 537

Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)

Other display settings, such as Scale and acquisition, can also be changed

during recording but are not saved with the session file. Think of these as

settings that help YOU see the recording and playback activity. They do NOT

change the data that is recorded.

During Playback

The State setting changes listed above are NOT allowed during playback.
However, all other display settings can be changed during playback to help

you analyze the recorded data.
In SA mode, when recordings are played back further trace processing is

possible. The Trace State(s) can be modified for post processing, and different

measurements such as Channel Power, Occupied BW, Spectrogram, and

Waterfall can be activated. This is because in SA all these measurements are

derived from the raw traces. If not compatible with the measurement type, a

MEAS UNCAL

message will appear on the screen.

Record/Playback Exceptions

— Markers can be activated and moved to help analyze recorded data.

However, marker position control is only available when playback is Paused.

— Field Strength Corrections is saved with the session file and it is also

allowed during playback. Learn about this Field Strength Corrections in

“Field Strength Measurements” on page 161

— Frequency Counter at Marker is NOT allowed during Recording or Playback.

Learn about this feature in

“Frequency Counter at Marker” on page 215

About State and User Tags

When any of the State settings (listed above) are changed during a recording,

a ‘state tag’ is inserted at the first trace number to be recorded with the new

setting.
In addition, you can insert a ‘User Tag’ at any time during a recording session

to indicate an external event, such as when an antenna is moved. During

playback, you can move quickly to any of these tags, or scroll through these

tags.
A symbol is used on the screen annotation to distinguish a User Tag from a

State Tag when scrolling through tags during playback.

Screen Annotation

During a record or playback session, the following is displayed in the top-left

area of the screen:

—

AutoSession02: 92/95 (state 4/5)_*_

Sep.22.2018 09:15:15 AM

where:

Summary of Contents for N9913B

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands

Keysight N9913B, User Manual

Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands