Keysight N9913B User Manual Download

Page: 161 / 896

Keysight N9938-90006 User’s Guide 161

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
SA Mode Settings

Field Strength Measurements

To measure the strength of any signal transmitted through the air, an antenna

must be connected to the FieldFox. The Field Strength feature allows you to

enter the frequency response of the receiving antenna (the Antenna Factor)

and associated cabling, and then have amplitude corrections automatically

compensate the displayed trace for that response.

Setting Field Strength Measurements
Trace 1

- Corrected trace with antenna factor. (Antenna = ON, Apply Corr =

ON)

Trace 2

- Uncorrected trace (Apply Corr = OFF). The Trace 2 trace state is

“View.” For information, refer to

“Trace Display States (SA Mode)” on page 201

Pink Trace

- Current correction factor. See below.

— Learn how to set Y-Axis

Units

“How to Set Y-axis Units” on page 158

— Use a Band Power marker to measure total power over a range of

frequencies. Learn how in

“Band/Interval Power Marker” on page 214

How to select and edit corrections for Field Strength measurements

The Antenna and Cable correction data survives a Mode Preset and Preset.
All Correction ON/OFF states survive a Mode Preset, but NOT a Preset.

— Press

Scale/Amptd

More

Corrections

— Then choose from the following:

—

Apply Corrections Auto Disabled

Use Auto and Disabled correction

for all settings. (Default = Auto).

—

Antenna Off

– Opens a softkey menu to enable/disable a antenna

and edit, save, create a new antenna factors table, recall, and set a

storage device location.

Summary of Contents for N9913B

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands

Keysight N9913B, User Manual

Search results

Summary of Contents for N9913B

Reviews:

Related manuals for N9913B

Brands by name

Popular brands