Figure 39
Connecting to an Instrument
3
The list shows instruments that have been given a VISA address.
If your instrument is not in the list,
1
Use the
Keysight
Connection Expert to check your instrument has
a VISA address
2
Click on the “Scan Again” button.
Once communication has been established to the instrument, its
details are shown.
4
If you need to change the connection configuration for an instrument
on the LAN, click on the “Configure Interfaces” button.
You can only configure the LAN parameters before the instrument
is connected.
1
Getting Started
48
Keysight
N77xx Series
Summary of Contents for N77 Series
