Installation Note N5245-90125 5
Getting Prepared
Protecting Your Workspace from Electrostatic Discharge
For information, click on the Chapter 1 bookmark, “Electrostatic Discharge
Protection” in a PNA Service Guide
1
.
ESD Equipment Required for the Conversion
Tools Required for the Conversion
About Completing this Conversion
1. See
“Downloading the Online PNA Service Guide” on page 4
.
Description
Keysight Part Number
ESD grounding wrist strap
9300-1367
5-ft grounding cord for wrist strap
9300-0980
2 x 4 ft conductive table mat and 15-ft grounding wire
9300-0797
ESD heel strap (for use with conductive floors)
9300-1308
Description
Qty
Part Number
T-10 TORX driver - set to 9 in-lbs (1.02 N.m)
1
N/A
Mini/precision flathead screw driver
1
N/A
Solder Aid or similar
1
N/A
Products affected
N5245-60124 noise figure board (with tabs)
Conversion to be performed by
Keysight service center or personnel qualified by Keysight
Estimated conversion time
1.0 hour
Estimated adjustment time
n/a
Estimated full instrument calibration time n/a
