28 Installation Note N5225-90107
Description of the Upgrade
Installation Procedure for the Upgrade
-
Step 18. Enable Option 417
Procedure Requirements
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must
not
be running.
— Refer to the license message you received from Keysight: Verify that the
analyzer’s model and serial numbers match those on the license message
you received from Keysight.
— Obtain a license key (A models) or license key file (B models) for installation
of this upgrade by following the instructions on the supplied Software
Entitlement Certificate.
— A keyboard must be connected to the network analyzer.
For "A" models, refer to
“Option Enable Procedure for "A" Model Instruments”
“Option Enable Procedure for "B" Model Instruments ”
Option Enable Procedure for "A" Model Instruments
1.
To start the option enable utility, press
UTILITY
,
then ,
then
. An option enable dialog box will appear.
2.
Click the arrow in the
Select Desired Option
box. A list of available options
will appear.
3.
In the Select Desired Option list, click
417 - Configurable TS + Attens
.
4. Using the keyboard, enter the license key in the box provided. The license
key is printed on the license message you received from Keysight. Enter
this key exactly as it is printed on the message.
5.
Click
Enable
.
6.
Click
Yes
in answer to the displayed question in the
Restart Analyzer?
box.
7.
When the installation is complete, click
Exit
.
"A" Model Option Verification Procedure
Once the analyzer has restarted and the Network Analyzer program is again
running:
1.
On the analyzer’s Help menu, click
About Network Analyzer
.
2.
Verify that “417” is listed after “Options:” in the display.
System
Service
Option Enable
