Keysight N5224B, Service Manual

Page: 188 / 614

5-26 Keysight N5224B/25B Service Guide
Theory of Operation
Synthesized Source Group Operation
5-
31 Output Strobe
Write Strobe
TTL out, active low data write strobe (1 μ s min)
32 No connect Not used
33 Pass Fail TTL out, latched, indicates pass fail (programmable polarity)
34 +5 V +5 Vdc, 100 mA max.
35 Sweep End TTL out, active low (10 μ s min) indicates sweep done
36 Pass/Fail Write
Strobe
TTL out, active low pass/fail write strobe (1 μ s min)
Table 5-8 PWR I/O Connector Pin Assignments
DB-9 Female Connector
Pin Name Description
1 +15V +15 V @ 400 mA
2 -15V -15 V @ 400 mA
3 AnalogOut1 Analog Output Voltage
Programmable ±10 V @ 100 mA out
Nominally 0 ohms
2.44 mV typical resolution
1 MHz BW
4 AnalogOut2 Analog Output Voltage
Programmable ±10 V @ 100 mA out
Nominally 0 ohms
2.44 mV typical resolution
1 MHz BW
Table 5-4 HANDLER I/O Connector Pin Assignments
Table 5-5 Table 5-6 Table 5-7
Rectangular 36-Pin Female Connector
Pin Numbers Name Function