14
N2804/5A Differential Probes User’s Guide
Attaching Probe Accessories
Attaching Probe Accessories
Before you can use the probe, gently push one of the supplied accessory tips onto
the probe leads as shown in
. For N2804A probes, extension leads can be
inserted between the tip and probe leads.
Figure 6
Attaching an Accessory Tip
WARNING
Must be Grounded. Before making connections to the input leads of this
probe, ensure that the probe’s output connector is attached to the channel
input of the oscilloscope and the oscilloscope is properly grounded.
CAUTION
To protect against electrical shock, use only the accessories supplied with this probe or in
the accessory kit.
CAUTION
This probe is to carry out differential measurements between two points on the circuit
under test. This probe is not for electrically insulating the circuit under test and the
measuring instrument.
N2804A
300 MHz Differential Probe
Terminate with 50 Ω
300V (Peak,
200V rms)
CA
T II
N2805A
200 MHz Differential Probe
Terminate with 50 Ω
200V (Peak,
rms)
CA
T II
N2804A
N2805A