16
N2795/6A User’s Guide
1
Using the Probes
Y-Leads Adapter with 0.1” Headers
The Y-lead adapter offers a
convenient and reliable method
to connect both the probe
signal and ground to probe
points on the board or other probe
accessories. For example, this can used to
connect to connector headers or other
accessories like the Flex Nose Clip Adapter as seen in the following
pictures.
The sockets accept 0.56-0.86 mm round and 0.64 mm square
(0.022 - 0.034 inch round and 0.025 inch square) diameter pins.
The maximum insertion depth is 7.5 mm (0.295 inch) and the outer
insulation of the socket is less than 2.54 mm. You can use it for
2.54 mm pitch (0.1 inch) terminals.
Figure 7
Probe with Y-Leads Attached
Summary of Contents for N2795/6A
