Keysight MXR2RACK, Installation Manual

Page: 5 / 24

Rack Mount Kit for MXR-Series Oscilloscopes Installation Guide 5
Installation
The following tools are required for installing the rackmount kit:
• T20 Torx driver
• #2 Phillips screwdriver
Preparing the Rack
1 To prepare the rack for sheet metal nut installation, eight rack mount units
must be designated for use. The following diagram shows how to determine a
rack unit.
This distance is
equivalent to
1 rack unit
Rack front view
Rack side view
Rack units may be
designated by arrows.
If not, narrow hole spacing
indicates start/stop point
of rack unit.