Keysight M8000 Series Getting Started Manual Download Page 37

Page: 37 / 58

Keysight M8040A High-Performance BERT Getting Started Guide

Basic Setup for M8040A

For further details on how to install, update or uninstall plugins, please

refer to the

M8000 Series User Guide

M8000 Series Plugins Getting

Started Guide

Step 10 - Install the Licenses

The usage of M8070B plugins is govern by Keysight Licensing. Keysight

Licensing provides tools and processes for floating, USB portable,

node-locked, and transportable licenses. These licenses can be installed

using the

Keysight License Manager

. It helps you install licenses on your

local machine (instrument or computer), or configure your local machine

to use licenses from a remote license server.

Depending upon the license types, the following version of

Keysight

License Manager

can be used to install the licenses:

• The node-locked and transportable licenses are installed by

Keysight

License Manager 5

• The floating and USB probable licenses are installed by

Keysight

License Manager 6

For details on how to install these licenses, you can refer the following

documents:
• M8000 Series User Guide

(

https://literature.cdn.keysight.com/litweb/pdf/M8000-91B08.pdf

)

• Keysight Licensing Administrator's Guide

(

https://literature.cdn.keysight.com/litweb/pdf/5951-5739.pdf

)

NOTE

All M8040A-BU1 licenses have been pre-installed (except for a

floating/networked license). All other system configurations require

license installation as described in this step.

NOTE

Please note that the Keysight License Manager 5 and Keysight License

Manager 6 get installed on your system when you install M8070B system

software.

Summary of Contents for M8000 Series



























































Search results

Summary of Contents for M8000 Series

Reviews:

Related manuals for M8000 Series

Brands by name

Popular brands

Keysight M8000 Series, Getting Started Manual

Search results

Summary of Contents for M8000 Series

Reviews:

Related manuals for M8000 Series

Brands by name

Popular brands