38 V3050A SA Frequency Extender Getting Started Guide
Safety and Maintenance Information
Connector Care
Adapter to 1 mm Input Port (without ruggedized adapter)
It is recommended that you always connect a ruggedized adapter to the
V3050A Input port. However, if you want to connect an adapter that uses the
inner threads, or cable directly to a test port connector, use the 4 lb-in end of
the dual torque wrench (silver end of the dual torque wrench). Do not use the
red end of the dual torque wrench which is only used when connecting the
stronger outside test port connector threads to the ruggedized adapter.
Never apply in excess of 4 lb-in of torque to the V3050A Input port inner
threads.
Figure 2-6 Wrenches Positioned on Correct Flats
