Keysight Technologies U9397A, Operating And Service Manual

Page: 22 / 27

3 Operating Guide
22 Keysight U9397A/C Operating and Service Manual
Installation
Initial inspection
1 Inspect the shipping container for damage. If the shipping container or
cushioning material is damaged, it should be kept until the contents of the
shipment have been checked for completeness and the instrument has been
checked both mechanically and electrically.
– Check for mechanical damage such as scratches or dents.
– Procedures for checking electrical performance are given under
“Operator’s
check” on page 23 or “Performance Tests” on page 25.
2 If the contents are incomplete, if there is mechanical damage or defect, or if
the instrument does not pass the electrical performance test, contact the
nearest Keysight Technologies Sales and Service office. Refer to “Sales and
Technical Support” on page 4 of this manual. Keysight Technologies will
arrange for repair or replacement of the damaged or defective equipment.
Keep the shipping materials for the carrier’s inspection.
3 If you are returning the instrument under warranty or for service, repackaging
the instrument requires original shipping containers and materials or their
equivalents. Keysight Technologies can provide packaging materials identical
to the original materials. Refer to “Sales and Technical Support” on page 4 of
this manual for the Keysight Technologies nearest to you. Attach a tag
indicating the type of service required, return address, model number, and
serial number. Mark the container FRAGILE to insure careful handling. In any
correspondence, refer to the instrument by model number and serial number.