Keysight Technologies U3022BH10, User'S And Service Manual

Page: 115 / 124

U3022BH10 Troubleshooting the Test Set
Receiver Signal Path Insertion Loss Test
Connect the RF Flex cables to the Source OUT and CPLR THRU ports as indicated in Table 28
below. Check that the results are similar to Figure 90 below.
RF Path Description
Control Mode Entry
<address>.<data>
Insertion Loss
(Typical)
0.0
Figure 90
Table 28 Source Bypass Signal Path Test Instructions
Path
#
16.0
Odd Ports
Path Components
Source OUT to CPLR THRU
1
2
1
Use the Source IN port associated with this group of test ports.
S10
S20
Figure 90 Source and Receiver Bypass Path Response
1
Even Ports
Source OUT CPLR THRU
Test Port
Group
RF Path Description
Control Mode Entry
<address>.<data>
Insertion Loss
(Typical)
0.0
Figure 90
Table 29 Receiver Bypass Signal Path Test Instructions
Path
#
16.0
Odd Ports
Path Components
A IN to CPLR ARM
1
2
1
Use the Source IN port associated with this group of test ports.
S11
S21
1
Even Ports B IN to CPLR ARM
Test Port
Group
Connect the RF Flex cables to the receiver A/B IN and CPLR ARM ports indicated in Table 29
below and check that the results are similar to Figure 90 above.
U3022BH10 User's and Service Guide 115