Keysight Technologies U3022AH10, User'S And Service Manual

Page: 11 / 92

Network Analyzer Requirements
Table 1 U3022AH10 Accessories
Keysight PN Description Qty
U3022AH10 Included Accessories
85052-60007 Short, coax 3.5 MM female 1
N4011-21002 Cable assembly, I/0 Test Set 1
N5222-20091 RF cable, semi-rigid, front panel jumper 16
U3022-90002 User's and Service Guide 1
U3022AH10 Option 042 Accessories (Purchased Separately)
0515-2317 Screw, metric (T15, M3.5, 12 mm long) 2
5023-0132 Locking feet, rear 1
N5242-20138 Rear Locking Link (right) 1
N5242-20139 Rear Locking Link (left) 1
U3022-20091 RF cable, semi-rigid 2
U3022-20092 RF cable, semi-rigid 2
U3022-20093 RF cable, semi-rigid 2
U3022-20094 RF cable, semi-rigid 2
U3022-80002 Label (Port 13) 1
U3022-80003 Label (Port 14) 1
U3022AH10
U3022AH10 Option 129 Included Accessories
N5242-20206 RF Locking Link, Opt 129 (right) 1
N5242-20207 Rear Locking Link, Opt 129 (left) 1
N3022-20238 RF cable, semi-rigid, ECal jumper 1
Table 2 PNA-X Configuration Requirements
12 Port Network Analyzer System Options Test Set File
N5241/2A/B PNA-X u3022ae10_pnax_p2.tsx
1
200
System Figure
1
14 Port Network Analyzer System
N5241/2A/B PNA-X
2
400
u3022ae10_pnax_p4.tsx 1
N5242A/B PNA-X
3
400
u3022 a h10_pnax_p4.tsx 2
1. For use with STD Test Set only
2. For use with Option 129 Test Set only
Network Analyzer Requirements
All network analyzers require Option 551 to be installed for multiport operation (N-Port error
correction and measurement capability).
Table 2 below provides a listing of other network analyzer
option requirements. For the measurement system to cover the full frequency range of the Test Set
option listed above, the network analyzer's frequency range should equal or exceed that of the Test
Set.
U3022AH10 User's and Service Guide 11