3 Review Hardware
3. 2. 7. 5 Connectors, E7770A CIU Rear Panel, Channel Cards
The E7770A CIU rear panel contains the connectors for up to four Channel Cards;
each rear panel Channel Card (labeled: 1A, 1B, 2A, 2B, 3A, 3B, 4A, 4B) corresponds to
a Channel Card available from the front of the E7770A CIU.
In the S9106AC-2IF 5G FR1 Multi-port Transceiver and
S9106AC-42D 5G FR1 Multi-port Transceiver configurations, only rear panel
connectors for CHANNEL 1A and CHANNEL 1B are usable with the E7770A-HB2 CIU
Channel Card, 7 to 15 GHz High IF.
LO/CTRL/PWR - Not used with S9106AC-2IF, S9106AC-4UP, and
S9106AC-42D.
Connector
TNC (f), 50 Ω,
nominal
Local oscillator, control, and power from
LO/CTRL/PWR
Frequency,
LO Power
DC Power
7 to 15 GHz,
10 dBm, minimum
+36 VDC, 1A
DUT IF IN HEAD IN
Connector
Type-N (f), 50 Ω,
nominal
Output for connecting to DUT for High IF testing.
DUT IF OUT HEAD OUT
Connector
Type-N (f), 50 Ω,
nominal
Input for connecting to DUT for High IF testing.
36
S9106AC-2IF, -4UP, and -42D 5G FR1 Multi-port Transceiver Solutions, Startup Guide
Summary of Contents for S9106AC-2IF
Page 6: ...2 S9106AC 2IF 4UP and 42D 5G FR1 Multi port Transceiver Solutions Startup Guide ...
Page 24: ...20 S9106AC 2IF 4UP and 42D 5G FR1 Multi port Transceiver Solutions Startup Guide ...
Page 42: ...38 S9106AC 2IF 4UP and 42D 5G FR1 Multi port Transceiver Solutions Startup Guide ...
Page 56: ...52 S9106AC 2IF 4UP and 42D 5G FR1 Multi port Transceiver Solutions Startup Guide ...
