Keysight Technologies S9101A, Startup Manual, Page: 35 / 98

4 Install Hardware
S9101A 5G Multi-Band Vector Transceiver, Startup Guide 31
4 Install Hardware
Before installing hardware, Review Safety
Requirements on page 3 .
Safety of any system incorporating the equipment is the
responsibility of the assembler of the system.
4. 1 Standard Configurations
The S9101A is available in three standard configurations:
Keysight S9101A-TR1 5G Multi-Band Vector Transceiver on page 32 , one-
channel configuration, consists of one RF transceiver and one mmWave
transceiver providing one Tx channel and one Rx channel, operating in one
frequency range at a time:
FR1 frequencies ranging from 380 MHz to 6 GHz
or FR2 banded mmWave frequencies from 24.25 to 43.5 GHz
Keysight S9101A-BK1 5G Multi-Band Vector Transceiver TR1 with
Blocker
on page 34 , one-channel configuration, with Blocker signal capability,
consists of two RF transceivers and one mmWave transceiver providing one Tx
channel and one Rx channel, operating in one frequency range at a time:
FR1 frequencies ranging from 380 MHz to 6 GHz
or FR2 banded mmWave frequencies from 24.25 to 43.5 GHz
This configuration provides the capability to perform Rx tests with a blocking
signal (interfering signal). It can generate a
Wanted signal and at the same time
generate a Blocking signal; a Wanted signal (produced from the RF Out of a
Primary M9410A VXT) is combined with a Blocking signal (produced from the
RF Out of a 2
nd
M9410A VXT). The combined Wanted and Blocking signals are
available in both the FR1 or FR2 frequency ranges.
Keysight S9101A-TR2 5G Multi-Band Vector Transceiver on page 36 , two-
channel configuration, consists of two RF transceivers and two mmWave
transceivers providing two channels of Tx and Rx capabilities. Each channel of
Tx and Rx operates in one frequency range at a time:
FR1 frequencies ranging from 380 MHz to 6 GHz
or FR2 banded mmWave frequencies from 24.25 to 43.5 GHz