10
Installation Note N9040-90017
Option B2X, 255 MHz Analysis Bandwidth
17.
Locate the spring clip in the kit. Install the spring clip to secure the flex circuit connection on
the Wideband Digital IF assembly.
18.
Re-install the Rear Brace and the Rear Panel. An additional flat head screw,
is
required to secure the new Wideband Digital IF assembly to the rear panel. This flat head
screw is in the bag of screws in the kit. Torque to 9 inch-pounds
19.
Re install the front top brace and use the
flat head screws in the kit in the
countersunk locations. Torque to 9 inch-pounds.
20.
Reinstall the rear top brace and outer case, side strap handles, and feet.
21.
Power up the instrument. Assure the instrument passes the auto alignments
