Introduction to the Instrument
Advanced Power System at a Glance
Front Panel Display at a Glance
Advanced Power System at a Glance
The Advanced Power System (APS) includes 1U and 2U rack-mountable DC power supplies and
power dissipators with performance and features that are optimized for automated test systems.
The APS models are available in power levels of 1 kW and 2 kW. Voltage levels range from 9 V to 160
V. Current levels range from 12.5 A to 200 A.
The output and system features are described as follows. Not all output features are available on
every power supply. The
section describes the features that apply only to specific
models.
Output features
l
Full programming capability is provided for the entire range of output voltage and current
l
Output can operate in voltage priority or current priority mode
l
High-speed up and down output programming
l
Output resistance programming
l
Turn-on/turn-off delays allow output on/off sequencing across multiple units
l
Current sharing capability for paralleled outputs
l
Protection capability includes over-voltage, over-current, over-temperature, and open sense lead
detection
l
Two-quadrant operation provides current sourcing and sinking capability
l
10% rated current-sink capability standard; 100% rated current-sink capability with N7909A
power dissipators
l
Output disconnect relays are included on N7900 models, and are available as options on N6900
models
1 Quick Reference
16
Keysight N6900/N7900 Series Operating and Service Guide
Summary of Contents for N6900 Series
