Rear Panel at a Glance
The following table lists the main parts of the rear panel, generally from left to right:
GPIB
The GPIB interface connector
Digital IO
The digital IO pins
USB
The USB interface connector
LAN
The LAN interface connector
Chassis ground
The chassis ground terminal. Provides an earth ground
Current sharing
The current sharing connector
Remote sense
The remote sense terminals
DC output
The positive and negative output terminals
P1 Dissipator output
Power connections to the N7909A. 1 kW power supplies require
one power dissipator. 2 kW power supplies require two power dis-
sipators to sink the rated output power.
P2 Dissipator interface
Power dissipator interface. One interface required per dissipator.
Only connect the supplied CAT6A cable to the P2 interface.
AC input
The AC lint input
For protection from electrical shock, the power cord ground must not be defeated. If
only a two-contact electrical outlet is available, connect the instrument’s chassis
ground screw (see above) to a good earth ground.
1 Quick Reference
20
Keysight N6900/N7900 Series Operating and Service Guide
Summary of Contents for N6900 Series
