Keysight N5990A MIPI M-PHY Receiver Test User Guide
67
Calibrations and Test Procedures
3
Connection Diagram
To display the connection diagram, right-click the desired test or
calibration and select
Show Connection
). Alternatively, the
connection diagram is displayed automatically when you start the selecetd
procedure.
Figure 31
Show Connection Diagrams
Multi-Channel without Switch
When the setup does not include a switch for multi-lane purposes, it is
necessary to connect each DUT lane to a different data channel output of
the pattern generator. In this case, the
J-BERT M8020A
system allows to
connect 1,2,3 or 4 data channels and the
J-BERT N4903B
1 or 2 data
channels.
shows the data channels for the
M8020A
and
for the
N4903B
.
Summary of Contents for N5990A
