Keysight Technologies N2797A, User Manual

Page: 22 / 48

22 N2797A User’s Guide
1
Using the Probe
Inspecting the Probe
• Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning material until the contents of the
shipment have been checked for completeness and the probe has been checked
mechanically and electrically.
• Check the accessories.
• If the contents are incomplete or damaged, notify your Keysight Technologies Sales
Office.
• Inspect the probe.
If there is mechanical damage or defect, or if the probe does not operate properly or
pass calibration tests, notify your Keysight Technologies Sales Office.
If the shipping container is damaged, or the cushioning materials show signs of stress,
notify the carrier as well as your Keysight Technologies Sales Office. Keep the shipping
materials for the carrier’s inspection. The Keysight Technologies office will arrange for
repair or replacement at Keysight Technologies’ option without waiting for claim
settlement.
Cleaning the Probe
Disconnect the probe from the oscilloscope and clean the probe with a soft cloth dampened
with a mild soap and water solution. Make sure the probe is completely dry before
reconnecting it to an oscilloscope.