IEEE 802.3 Ethernet KR/CR Compliance and Debug Application Getting Started
89
Installing N108xA on the oscilloscope
4
Installing the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test Application
Follow the steps below to install the N108xA IEEE 802.3 Ethernet KR/CR Compliance Test
Application and its license as well as the license for the 86100DU-401. When the license for
86100DU-401 is installed, the 86100DU-401 software is enabled.
1 Go to www.keysight.com and search for and download the compliance application. Install the
application on the specific 86100D for which you redeemed the license.
2 Save the license file that you received from Keysight in a folder on the local disk or in an
accessible memory device.
3 If not already done, purchase an 86100DU-401 or F-AEYE license. Save the license file that you
received from Keysight in a folder on the local disk or in an accessible memory device.
4 If the FlexDCA software is running on the Oscilloscope, close FlexDCA.
5 From the Windows
Start
menu, click
All Programs>Keysight License Manager
to launch the Keysight
License Manager.
Figure 87
Launching Keysight Connection Expert from the Start menu
NOTE
When you redeem an N108xA license, you must select whether to install the application on the
Oscilloscope or a specific PC.
NOTE
Keysight License Manager version 5.1 (and higher) have a different user interface than version
5.0 (or earlier). Even though the path to launch the Keysight License Manager is the same for
both versions, refer to the
Keysight License Manager Online Help
for the respective versions to
find more information about the functionality of the application.
