Keysight AXIe Chassis Firmware Revision Guide
17
Step 4. From Chassis Web Page Run the Chassis Firmware Update
f
Follow the instructions in the Status Update window. When the program is
complete and you are directed to do so, cycle power to the chassis.
Re-establish communication through the web interface, and verify the new
firmware version on the chassis’ web interface.
g
After the update is complete, remove temporary files and applications used
during this installation. Close unneeded Internet Explorer windows.
External host PC with PCIe connection to chassis
If you are using an external host PC with a PCIe connection to the
AXIe chassis, at the end of the firmware update process when you
are instructed to cycle power on the AXIe chassis, you must shut
down the host PC before powering off the chassis.
External host PC with LAN connection to chassis
If you are using an external host PC with a LAN connection to the
AXIe chassis, at the end of the firmware update process when you
are instructed to cycle power on the AXIe chassis, only the chassis
needs to be shut down. You do not need to shut down the host PC
but you may need to restart Keysight Connection Expert.
M953
If you are using an installed M9536A Embedded AXIe Controller,
at the end of the firmware update process when you are
instructed to cycle power on the AXIe chassis, you must shut
down the controller (shut down Microsoft Windows) before
powering off the chassis.
Applies to: External
host PC with PCIe
connection to chassis
Applies to: External
host PC with LAN
connection to chassis
Applies to: M9536A
Embedded Controller
