Keysight Technologies M1740A Getting Started Manual Download Page 36

Page: 36 / 39

36 Getting Started Guide

Troubleshooting
Where to get technical help

Where to get technical help

For online assistance:

http://www.keysight.com/find/assist

To contact Keysight Technologies:

http://www.keysight.com/find/contactus

Also, see

“Locations for Keysight Technologies” on page 38

Identifying Problems

If the status indicator on the M1740A is not lit, or if it appears that mmWave

signals are not being exchanged with the Device Under Test check the

following:

Are the RF cables connected appropriately between the M1740A and the

measurement instrument? (See

“Port Connections to Measurement

Instruments” on page 23

Is the E7760B (or other measurement instrument) powered on?

Is the E7760B (or other measurement instrument) properly configured (for

example, are the input and output ports selected appropriately for your

test setup?).

If no obvious problem in the test setup can be found, contact Keysight

Technologies to ask for technical support.

No operator serviceable parts inside. Refer servicing to qualified personnel. To

prevent electrical shock do not remove covers.

Summary of Contents for M1740A








































Search results

Summary of Contents for M1740A

Reviews:

Related manuals for M1740A

Brands by name

Popular brands

Keysight Technologies M1740A, Getting Started Manual

Search results

Summary of Contents for M1740A

Reviews:

Related manuals for M1740A

Brands by name

Popular brands