C
HAPTER
8
Accessing the BreakingPoint user interface
This procedure assumes that your MN network has a DNS and DHCP server. If
not, please configure a static IP address as described in the IP Configuration
using KCOS CLI section. Then proceed to step 2 shown below.
After the MN has been booted for 10-15 minutes, the MN hostname should be registered with your
DNS.
1. Enter the MN hostname into your HTML browser URL field.
The MN hostname is provided on the MN luggage tag as shown in the following example. The
format is,
eagle-APS-M1-TW<serial #>
. For this example, the hostname that will be entered in the
URL field for this unit would be, “eagle-APS-M1-TW21160104”.
2. Log in to BPS UI. If the username and password are not present on the MN luggage tag, use:
Username:
admin
| Password:
admin
.
If this access method does not work, there may be network issues. Please
perform the IP Configuration using KCOS CLI procedure to access the BPS
user interface or troubleshoot the issue.
3. Proceed to the
Getting started with the BPS user interface
section of this document.
– 18 –
Ixia APS-M1010/APS-ONE-100
