Keysight Technologies InfiniVision 6000L Series, Service Manual

Page: 4 / 100

4 6000L Series Oscilloscopes Service Guide
Warranty Status
To find the warranty status of your oscilloscope:
1 Direct your web browser to: www.keysight.com/find/warrantystatus
2 Enter your product’s model number and serial number. The system will search
for the warranty status of your product and display the results. If the system
cannot find your product’s warranty status, select
Contact Us
and speak with an
Keysight Technologies representative.
Using this book with the 6000L Series oscilloscopes
The 6000L Series oscilloscopes do not have a built-in display or front panel control keys. If you are
using a 6000L Series oscilloscope, and this book refers to using front panel controls, you can use the
built-in Web control feature described in the 6000L Series Oscilloscopes User’s Guide to complete the
instructions. If you do not have the 6000L Series Oscilloscopes User’s Guide , you may obtain a
printable electronic copy at www.Keysight.com/find/6000manual.
Digital Channels
Because all of the oscilloscopes in the Keysight 6000L Series have analog channels, the analog channel
topics in this book apply to all instruments. Whenever a topic discusses the digital channels, that
information applies to DSO models that have been upgraded to an MSO only.
Abbreviated instructions for pressing a series of keys
Instructions for pressing a series of keys are written in an abbreviated manner. Instructions for pressing
Key1, then pressing Softkey2, then pressing Softkey3 are abbreviated as follows:
Press [Key1]
&
Softkey2
&
Softkey3 .
The keys may be front panel keys, or softkeys, which are located directly below the oscilloscope
display.