Keysight Technologies FieldFox A Series, User Manual

Page: 535 / 756

Keysight N9927-90001 User’s Guide 535
Channel Scanner (Option 312)
How to Set Up Channel Scanner
— Time Interval 1 sec to 3,000 seconds or
— Distance Interval from 1m to 10 km
— When done, press Back
3. Press Save Recall Rec-Playback > File Type CSV or KLM
4. To begin recording: Press Record
If Auto Save is On (default) Measurements are stored automatically
accorded to the specified time or distance interval values. Refer to step 5 .
5. Optional: Auto Save ON (default)—When Auto Save is on, during
recording, the FieldFox stores intermediate results in a temporary file. If
the power fails during recording you can retrieve the results. Select Recall
Log File . Select the temporary file name.
Press Record Settings > Auto Save On Off
6. When done press Stop or Esc . The files save dialog is displayed. Edit the
file name where the file results will be stored.
7. Press Done
8. Press Back
Playing a Recorded Log and Viewing the Spectrogram
To play the log results:
1. Press Data Logging > Play
2. Then choose:
— Optional: Use the RPG (fine adjust) or the arrow keys (coarse adjust)
to change the color bar.
— Position to change the position along the time record’s
results. Recording must be Paused to use Position.
— Red Limit to change the color bar.
— Blue Limit to change the color bar.
3. Press Stop or Esc to exit the log recording.
To pause the log play:
1. Optional: Press Pause Resume to pause or resume the log recording.
2. Then choose:
— Optional: Use the RPG (fine adjust) or the arrow keys (coarse adjust)
to change the color bar.
— Position to change the position along the time record’s
results.
— Red Limit to change the color bar.