9
Install the A14 Digital Bus Baseband Generator Board
Remove the A40 Compact Flash Drive Assembly
If the unit has a flash drive, remove the flash drive. Otherwise, proceed to
“Install the Baseband Board”
.
Refer to
Figure 3
and
Figure 4
for this procedure.
1. Disconnect the power cord.
2. Disconnect the W66 ribbon cable from A18P2.
3. Using the standard screwdriver, unlock the A41 door latch screw by rotating counter–clockwise.
4. Remove the flash card (if applicable).
5. Using the T–10 driver, remove the two upper screws (1) that attach the A40 PCA/CF drive assembly to the rear panel.
Figure 3
A40 Flash Drive Assembly
W66/A18P2
A40
