Keysight Technologies E8257DS Series, User Manual

Page: 7 / 18

User’s Guide E8251-90283 3
E8257DS02-S15
System Setup
System Setup
1. Connect the interface cable (included with this option) from the millimeter-wave source
module and to the rear panel on the PSG. Refer to Figure 1 .
2. Connect the RF cable (included with this option) from the SMA RF Input connector on the
millimeter-wave source module to the RF Output connector on the PSG, using the adapter
listed in Table 1 . Refer to Figure 2 .
Figure 1 Interface Cable Installation
Figure 2 RF Cable Installation
Interface Cable
Source Module Interface Connecto
r
RF Cable
Millimeter
Source RF Output
RF Cable