Keysight Technologies E5053A, User Manual

Page: 16 / 37

16 Keysight E5053A Microwave Downconverter
Installation
Mounting front handles/flanges for rackmount
1-
Figure 1-4 Mounting the handle/rackmount kit
Mounting handle kit (Option 1CN)
The handle kit is a kit that contains a pair of front handles used to
move/transport the E5053A. Follow these steps to mount it, referring to the
Figure 1-4 .
Step 1. Remove the trim strips (1) stuck to both the sides of the front panel (stuck to
the frame).
Step 2. Mount the front handles (3) to both the sides of the front panel of the E5053A
with the attached screws.
If a front handle you mounted is damaged, replace it with new one
immediately. If you use a damaged front handle to move/transport the
instrument, the handle may break, which may injure the operator or break
the instrument.