6
Installation Note N9020-90133
Installation Procedure
NOTE
1. It is recommended that all of the parts that have just been removed be
stored away somewhere together in case you need to return the instrument to
the bench top configuration.
2. The screws attaching the four rear bumpers are what hold the instrument
cover in place. Once these have been removed, be careful not to disturb the
instrument cover placement as it is seated into the EMI gasketing in the front
frame. Also, removal or excessive movement of the instrument cover may
break any calibration or security seals that may have been placed on the
instrument.
6.
. Locate four rear bumper feet
(1)
), four screws (
)
and four washers (
) from the kit. Install the rear bumper feet. Secure with screws
and washers. Torque to 21 in-lbs.
Figure 2
Rear Bumper Installation
7.
Locate and install four foot hole plugs
(2)
) from the kit.
