2-24 Keysight 85309B User’s and Service Guide
Operating Information
Performing the Operator’s Check
2-
13.
Connect a test cable between the PNA Port 2 and the 85309B rear panel
port Test 1 IF Out (J9).
14.
Verify that the W59 jumper is in place between the J7 and J8 ports on the
85309B rear panel.
15.
Place a marker on the PNA trace. In the frequency range of 10 – 20 MHz,
the Test IF response trace should be in the range of +21 dB to +25 dB. See
for a typical Test IF response trace.
Figure 2-9
Typical Test IF Response Trace
For Option 00x and 40x Models Only: Checking the J12 Test 2 IF Out
1.
Connect a test cable between the PNA Port 1 and the 85309B rear panel
port Test 2 LO/IF (J11).
2.
Connect a test cable between the PNA Port 2 and the 85309B rear panel
port Test 2 IF Out (J12).
3.
Place a marker on the PNA trace. In the frequency range of 10 – 20 MHz,
the Test IF response trace should be in the range of +21 dB to +25 dB. See
for a typical Test IF response trace.
Summary of Contents for 85309B LO/IF
Page 6: ...vi Keysight 85309B User s and Service Guide...
Page 18: ...1 10 Keysight 85309B User s and Service Guide Getting Started Getting Help with Your 85309B 1...
Page 86: ...4 32 Keysight 85309B User s and Service Guide Service Replaceable Parts 4...
