Keysight Technologies 11612A, Operating And Service Manual

Page: 5 / 16

Operation and Service Manual 11612-90001 3
11612A Bias Network
11612A Specifications
11612A Option 001 Specifications
Frequency Range 0.045 to 26.5 GHz
Return Loss (both ports) – Minimum --
0.045 to 8 GHz 20 dB
8 to 18 GHz 18 dB
18 to 26.5 GHz 14 dB
Insertion Loss – Maximum --
0.045 to 12.4 GHz 0.8 dB
12.4 to 26.5 GHz 1.3 dB
Maximum Bias Current 500 mA
Maximum Bias Voltage ± 40 V
dc
Frequency Range
a
a. Operation below 0.4 GHz is possible but not specified.
0.4 to 26.5 GHz
Return Loss (both ports) – Minimum --
0.045 to 1 GHz 14 dB
1 to 18 GHz 18 dB
18 to 26.5 GHz 14 dB
Insertion Loss – Maximum --
0.4 to 12.4 GHz 1.0 dB
12.4 to 26.5 GHz 1.5 dB
Maximum Bias Current 2 amps dc ; up to 32 amps in pulsed mode. Refer
to Figure 5 on page 10 and Figure 5-1 on
page 11 .
Maximum Bias Voltage ± 100 V
dc
Duty Cycle – Maximum Refer to the duty cycle curves in Figure 5 on
page 10 and Figure 5-1 on page 11 .
Pulse Width – Maximum Refer to the duty cycle curves in Figure 5 on
page 10 and Figure 5-1 on page 11 .
It is critical that you properly set the power levels before connecting the
bias network to the power supply. Failure to do so may result in irreparable
damage to the bias coil. Bias coils damaged by overheating are not
covered under warranty.