Keyscan Inc. A Member of the Kaba Group
20
11.
After completing the Server parameters, press 1 for Channel 1 setup parameters and
enter the following Keyscan values. Press the Enter key after each entry.
1 Channel 1 (Keyscan Values)
Baudrate = 9600 (Must match ACU settings)
I/F Mode = 4C
Flow = 00
Port No. = 3001
ConnectMode = C0
Send ‘+++’ in Modem Mode = N
Show IP addr after ‘RING’ = N
Remote IP Address = 000.000.000.000
Remote Port = 0
DisConnMode = 00
FlushMode = 80
Pack Cntrl = 01
DisConnTime = 15:00
SendChar 1 = 00
SendChar 2 = 00
12.
After completing the Channel 1 parameters, Press 9 to save the configuration and
restart the NETCOM2P unit.
Note
To exit without saving any changes, press 8.
