background image

Thank you for purchasing a KEYS treadmill!  The HEALTH TRAINER 700 treadmill was designed to 

meet your needs for cardiovascular exercise.   

Before you start, please read the Owner’s Manual and become familiar with the operation of your new 
treadmill. 

Remember to take the time to perform the stretching exercises provided on Page 6 to avoid 

injury. 

Do not stand on the walking belt while pressing the Power button or Start/Stop button. 

Always adjust the speed of the treadmill in small increments as this treadmill is capable of high 

speeds. 

If you are taking medication, consult your physician to see if the medication will affect your exercise 

heart rate. 

If you have heart problems, you are not active, and/or are over the age of 35 years, do not use the 

pre-set treadmill programs or start an exercise program without first contacting and receiving approval 
from your physician. 

To avoid the risk of electrical shock, always keep the console dry. Do not spill liquids on the console.  

KEYS recommends a sealed water bottle for beverages consumed while using the treadmill.   

    

Please review the following picture below to familiarize yourself with the listed parts. This manual covers several 

treadmills, so the one pictured below may not be identical to your particular model. 

Before You Start

 

PAGE 5 

SAFETY LATCH 

ELECTRONIC DISPLAY 

CONSOLE 

WATER BOTTLE  
HOLDER 

(WATER BOTTLE NOT INCLUDED

SIDE HAND RAILS 

UPRIGHTS 

MOTOR COVER 

WHEEL 

REAR ROLLER 
ADJUSTMENT BOLTS 

FOOT RAILS 

WALKING BELT 

READING RACK 

Summary of Contents for Health Trainer 700




















Reviews: