background image

15 

Maintenance Instructions 

WARNING! 

Before performing any maintenance to your treadmill, always unplug 

the power cord from the surge protector.

 

CLEANING 

Routine cleaning of your Keys Fitness treadmill will extend the life of your treadmill.  WARNING!  To prevent electrical 
shock, be sure the power to the treadmill is OFF and the unit unplugged from the wall electrical outlet before 
attempting any cleaning or maintenance. 
AFTER EACH WORKOUT:  Wipe off the console and other treadmill surfaces with a clean, water dampened soft 
cloth to remove excess perspiration.  USE NO CHEMICALS. 
WEEKLY:  Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the belt and 
eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week. 

DECK LUBRICATION 

The walking belt has been pre-lubricated  at  the  factory.    However,  it  is  recommended that the walking board be 
checked periodically for lubrication to ensure optimal treadmill performance. 

Every 30 days or 30 hours of operation, lift the sides of the walking belt and feel the top surface of the walking board 
as far under as you can reach.  If you feel signs of silicone, no further lubrication is required. If it feels dry to the 
touch, follow the instructions below. 

Please use silicone such as “Napa 8300”  (available at most stores). 
 
TO APPLY LUBRICANT TO THE WALKING BOARD 
1) Position the walking belt so that the seam is located on top and in the center of the center of the walking board. 
2) Insert the spray nozzle into the spray head of the lubricant can. 
3) While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board 
approximately 6” from the front of the treadmill.  Apply the silicone spray to the walking board, moving from the front 
of the treadmill to the rear.  Repeat this on the other side of the belt.  Spray approximately 4 seconds on each side. 
4) Allow the silicone to ‘set’ for one minute before using the treadmill. 
 

WARNING: Do not overlubricate the walking board.  Excess lubricant should be wiped off with a clean towel. 

Summary of Contents for 980HRS























Reviews: